Whole-House Rewiring in Apopka, FL
Estelis Electrical LLC replaces aluminum, cloth-covered, and knob-and-tube wiring with modern, code-compliant copper wiring — protecting your home and making it easier to insure.
Whole-house rewiring replaces old, unsafe, or undersized wiring — aluminum, cloth-covered, or knob-and-tube — with modern copper wiring that meets current electrical code. In Apopka, FL, whole-house rewiring typically costs $3,500 to $15,000+ depending on home size and access. Estelis Electrical LLC handles the permit and inspection process for every rewiring job. Call (407) 305-0793.
Signs Your Apopka Home Needs Rewiring
Wiring doesn't fail all at once — it degrades gradually as insulation dries out, connections loosen, and materials that were standard decades ago prove unsafe by today's standards. Aluminum branch wiring, common in Apopka homes built between 1965 and 1975, is the most well-documented example: aluminum expands and contracts more than copper with heat cycles, which loosens connections at every outlet, switch, and junction box over time.
Homes even older than that — some in the historic sections near Park Avenue — may still have cloth-insulated wiring or knob-and-tube systems from the 1940s and 1950s. These systems have no grounding conductor at all, which means every outlet on that circuit is a shock and fire risk with no path for a surge to safely dissipate.
Not Sure If You Need a Full Rewire?
We'll inspect your home's wiring and tell you honestly whether you need a full rewire, targeted repairs, or aluminum pigtailing — then give you a firm price for whichever option fits.
(407) 305-0793 — Call NowWhole-House Rewiring Cost in Apopka, FL
Rewiring cost depends heavily on square footage, whether walls are open or finished, and how much of the system needs replacement. These are typical ranges for the Apopka area.
| Rewiring Scope | Typical Cost |
|---|---|
| Aluminum wiring pigtailing (per connection point) | $40 – $75 per point |
| Partial rewire (select circuits/rooms) | $1,500 – $4,000 |
| Full rewire, 1,000–1,800 sq ft home | $3,500 – $8,000 |
| Full rewire, 1,800–3,000+ sq ft home | $8,000 – $15,000+ |
These are general ranges, not a quote. Estelis Electrical provides a firm price after an on-site wiring inspection.
How a Rewiring Project Works
Wiring Inspection
We check your panel, attic, and a sample of outlets to identify wiring type, condition, and scope of work needed.
Firm Price and Plan
You get a written price and a room-by-room plan before any work starts, including which areas may need drywall access.
Permit Filed
We submit the permit application to Orange County before scheduling your work dates.
New Wiring Installed
New copper wiring is run through existing cavities where possible, with minimal drywall access. Old wiring is removed or safely capped.
Inspection and Documentation
We schedule the Orange County inspection and provide documentation you can give to your insurance company.
Often Paired with Rewiring
Electrical Panel Upgrades
If your wiring is outdated, your panel often needs an upgrade too — we can bundle both projects into one visit.
Learn More →Outlet & Switch Installation
New wiring means it's the ideal time to upgrade to GFCI outlets and modern switches throughout your home.
Learn More →Whole-House Surge Protection
Protect your new wiring investment with a Type 2 surge protector installed at the panel.
Learn More →Whole-House Rewiring FAQ
Whole-house rewiring in Apopka typically costs $3,500 to $15,000 or more, depending on square footage, wall access (open studs vs. finished drywall), and how much of the electrical system needs replacement. Estelis Electrical provides a firm, written price after inspecting your home's existing wiring.
Homes built between 1965 and 1975 in the Apopka area are the most likely to have aluminum branch wiring. Estelis Electrical can identify aluminum wiring by checking the cable jacket markings at your panel and at outlets — look for "AL" or "Aluminum" stamped on the sheathing. If you're unsure, call (407) 305-0793 for a free inspection.
In many cases, yes. Estelis Electrical uses fish tape and minimal-access techniques to run new wiring through existing wall cavities, attic spaces, and crawl spaces wherever possible. Some drywall access points are usually still needed, but a full gut rewire is rarely required. We patch and prepare access points for paint after the work is complete.
A partial rewire (aluminum pigtailing or targeted circuits) can take 1 to 3 days. A full whole-house rewire for an average 1,800 to 2,500 square foot Apopka home typically takes 5 to 10 business days, depending on access and whether the home is occupied during the work. Estelis Electrical gives you a specific timeline before starting.
Many Florida insurance carriers now require an aluminum wiring inspection or full rewire before issuing or renewing a homeowners policy on pre-1975 homes. Some insurers accept copper pigtailing (connecting aluminum wire to copper with approved connectors) instead of a full rewire. Estelis Electrical can perform either option and provide documentation for your insurance company.
Get a Free Wiring Inspection
Estelis Electrical will inspect your home's wiring, explain what you're working with, and give you a firm price — no pressure, no obligation.
(407) 305-0793 — Call Now